Timber Pole Retaining Wall Lighting
To build timber pole retaining wall, start by digging a trench along the line where the wall you will trench should be about the depth and width of the wood that you will use to build the wall. If you need space to work on the back side of the wall, dig out the space before you start to build the wall. Use the line level to the ground level where the wood will lie.
Place the first row of wooden flat in a ditch. After your first line of wood placed along the trench began to pile up the second row of your timber. Stagger end of the timber to ensure timber pole retaining wall is strong. Attach each layer to the bottom layer of wood with a nail 60D 8 inches long. Wooden retaining wall that was built straight up – not tilted like a stone wall – thus keeping the level or plumb useful when you stack them.
If timber pole retaining wall you will be higher than about 18 inches using wooden tie-back every eight or ten feet at various levels to withstand vertical wall and make sure it will not fall forward because of the constant pressure given it back (default on).
To add a wooden tie-back, just lay the wood perpendicular to the other timber but with a length extending to the area to be re-filled. When the area is re-filled timber will act as an anchor for the timber pole retaining wall in place and make sure your timber retaining walls will survive.wood retaining wall ideas,retaining wall lighting,timber post retaining wall,retaining wall light