How To Make Concrete Garden Troughs
How To Make Concrete Garden Troughs – concrete garden troughs is both decorative and durable containers for plants and flowers. They also withstand fluctuations in temperature better than clay pots, which means, you can leave them outdoors during the winter. Since they are available in nurseries are expensive and difficult to transport home, consider making your own.
Find a rectangular plastic storage container to use as a form of pan and place it on a flat surface to make concrete garden troughs. Make a hole in the inside bottom of the container near one side by means of a drill and a 1/4-inch drill. Insert a dowel into the hole, creating a drain hole in the bottom of the trough. Add Find a smaller carton which fits within the larger storage containers and cut tabs using a utility knife. Fill the center of the box with sand to keep it firmly, but do not place it in the plastic storage box yet. Add a plastic garbage bag over the storage basket Enoch stop down inside tightly. Open a bag of quick-setting concrete mix and pour it into a wheelbarrow. See the bag’s instructions and add the appropriate amount of water. Mix up the concrete with a trowel until no part remains dry.
To make concrete garden troughs fill the bottom of the pool of 1 to 2 inches of concrete mix and level out with trowel. This concrete form the base of the trough in the small box in the middle of the wet concrete and then add more concrete around the sides until you reach the top of the inner box. Cover the entire mold with a plastic bag to prevent it from drying out. Wait one week, if the temperature is above 50 degrees Fahrenheit and two weeks if it is lower. Remove foil and grab the plastic bag to remove the pan from the mold. Set the pan in a place that stays above freezing for another two weeks. Then spray it with water from a garden hose once a day for another one to two weeks in order to reduce the alkalinity of concrete, which can damage many plants.