Farmhouse sofa table – A stylish table can brighten up any room. A farmhouse table is a sturdy table that can go in almost any kitchen. A farmhouse table can have either four legs or a pedestal base. This version uses the pedestal base because it is robust and easier to build. When the project is complete, you will find great satisfaction in having friends over to show off your new farm table.
Use the farmhouse sofa table saw to cut eight slats of wood that is about 2 to 3 inches wide. Sand the wood until smooth. Line all the pieces in a row. Then make a leg pattern from balsa wood. The two ends should rest flat on the table base and floor. Make sure the pattern you will do this. Trace the pattern onto 2-inch thick wood stock. Use a band saw to cut the three legs of the wood stock. Sand all three legs. Then drill two hangers pilot hole in each leg. Use locking pliers to fasten the mounting bolts and legs to the table base. Mark the location of each bone at the base, and drill hole to screw the legs to the table.
Cutting a 5 foot square from the plywood surface of the table. Sand the plywood. Attach to the table with screws, fasteners and adhesives. Cut four 1-inch thick wood about 2 inches wide. These should match the length of the table, so they should be anything less than 5 meters. Sand they well. Unscrew each piece under the table top at the edge of the table. Use a wood stain to color the entire farmhouse sofa table.