Corner Farmhouse Sink Installation
Farmhouse sink installation kitchen is not as difficult as many believe. Many people find it appealing to a corner kitchen sink because it uses a hard to use, particularly as countertop little space . A sink is an important part of a working kitchen. And then install a sink corner kitchen is not difficult then installs a regular sink.
Track the template that came with the farmhouse sink installation on the countertop where the sink to be install, which is approximately 1 1/2 inches from the sink to the wall. And then, drill a 3/8-inch hole in each corner of the sink contour. Also cut the outline of the sink with a jigsaw beginning of one of the predrilled holes. Screw 2x pieces of wood supports spanning for each section that you’ve cut to assist in cutting out and keep it from falling down.
Then, remove the support under after each section has been cut. Lift out the cut portion of the countertop. Apply a bead of silicone on the bottom of the sink along the edges. To create a water thread seals between the farmhouse sink installation and the countertop. Then, turn over the sink and gently insert it with the opening in the countertop. Release the sink in place and allow the sealant to contact the countertop. Install the mounting clip over the countertop pulling drop down and secure it in place.